Asus DSBF-D 1U User Guide - Page 63

10. CPU and system fan connectors (4-pin CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2/3/4, FBD_FAN1) The fan connectors support cooling fans of 350 mA ~ 740 mA (8.88 W max.) or a total of 3.15 A ~ 6.66 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! ® DSBF-D Series CPU_FAN1 REAR_FAN1 REAR_FAN2 FBD_FAN1 CPU_FAN2 FRNT_FAN2 FRNT_FAN1 FRNT_FAN3 FRNT_FAN4 DSBF-D Series Fan connectors CPU_FAN1 CPU_FAN2 PWM Control FAN Speed FAN Power GND PWM Control FAN Speed FAN Power GND REAR_FAN1 REAR_FAN2 FBD_FAN1 GND FAN Power FAN Speed PWM Control GND FAN Power FAN Speed PWM Control GND FAN Power FAN Speed PWM Control FRNT_FAN1 PWM Control FAN Speed FAN Power GND FRNT_FAN3 PWM Control FAN Speed FAN Power GND FRNT_FAN2 PWM Control FAN Speed FAN Power GND FRNT_FAN4 PWM Control FAN Speed FAN Power GND 11. Power supply SMBus connector (5-pin PSUSMB1) This connector is for the power supply SMB cable, if your power supply supports the SMBus function. I2C_7_CLK# I2C_7_DATA# NC GND +3.3V Remote Sense ® DSBF-D Series PSUSMB1 DSBF-D Series Power supply SMBus connector ASUS DSBF-D Series 2-41