Asus P2V-B P2V-B User Manual - Page 29
H/w Setup
View all Asus P2V-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
III. H/W SETUP Connectors III. HARDWARE SETUP 3. Parallel Port Connector (26-1 pin PARALLEL) This connector supports the included parallel and PS/2 mouse connector set. Connect the parallel ribbon cable to this connector and mount the bracket to the case on an open slot. A PS/2 mouse connector is included for the USB/IR/Mouse onboard connector if the optional USB/MIR connector is not used. You can make available the parallel port and choose the IRQ through "Onboard Parallel Port" in Chipset Features of BIOS SETUP. (Pin 26 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 26 plugged). NOTE: Serial printers must be connected to the serial port. Orient the red stripe on the cable to PIN 1 USB/MIR Parallel PS/2 Mouse Connector Connector P2V-B R PIN 1 P2V-B Parallel Port Connector 4. Serial Ports (10-1 pin COM1/COM2) These connectors support the provided serial port ribbon cables with mounting bracket. Connect the ribbon cables to these connectors and mount the bracket to the case on an open slot. You can make available the serial port and choose the IRQ through "Onboard Serial Port" in Chipset Features of BIOS SETUP. (Pin 10 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 10 plugged). P2V-B R P2V-B Serial Ports COM 1 COM 2 PIN 1 PIN 1 ASUS P2V-B User's Manual 29