Asus P5GDC Pro User Manual - Page 80

Enhanced Mode Support On [SATA mode] The default setting SATA allows you to use native OS on Serial ATA and Parallel ATA ports. We recommend that you do not change the default setting for better OS compatibility. In this setting, you may use legacy OS on the Parallel ATA ports o n l y i f you did not install any Serial ATA device. The S-ATA+P-ATA and P-ATA options are for advanced users only. If you set to any of these options and encounter problems, revert to the default setting S A T A. Configuration options: [S-ATA+P-ATA] [SATA mode] [P-ATA] The O n b o a r d I D E O p e r a t e M o d e and its submenu items appear only when the C o n f i g u r e S A T A A s item is set to Standard IDE. Onboard Serial-ATA BOOTROOM [Disabled] Enables or disables the onboard Serial ATA boot ROM. Configuration options: [Disabled] [Enabled] The O n b o a r d S e r i a l - A T A B O O T R O M item appears only when the C o n f i g u r e S A T A A s item is set to RAID mode. ALPE and ASP [Disabled] Enables or disables the ALPE and ASP. Configuration options: [Disabled] [Enabled] Stagger Spinup Support [Disabled] Enables or disables the stagger spinup support. Configuration options: [Disabled] [Enabled] AHCI Port 3 Interlock Switch [Disabled] Enables or disables the Advanced Host Controller Interface (AHCI) Port 3 interlock switch. Configuration options: [Disabled] [Enabled] The A L P E a n d A S P item appears only when the C o n f i g u r e S A T A A s item is set to AHCI. IDE Detect Time Out [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 4-16 Chapter 4: BIOS setup