Asus P9D-X User Guide - Page 80

USB transfer time-out [20 sec] Allows you to select the USB transfer time-out value. Configuration options: [1 sec] [5 sec] [10 sec] [20 sec] Device reset time-out [20 sec] Allows you to select the USB device reset time-out value. Configuration options: [10 sec] [20 sec] [30 sec] [40 sec] Device power-up delay [Auto] This allows you to set the maximum time the device will take before it properly reports itself to the Host Controller. Configuration options: [Auto] [Manual] 4.4.7 TPM Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced Configuration TPM Support [Disable] Current Status Information NO Security Device Found Enables or Disables BIOS support for security device.O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. Security Device Support [Disabled] Allows you to enable or disable BIOS support for security devices. Configuration options: [Disabled] [Enabled] 4.4.8 ACPI Settings Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced ACPI Settings Enable Hibernation ACPI Sleep State [Enabled] [Both S1 and S3 avai...] Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some OS. Enable Hibernation [Enabled] Allows you to enable or disable the Hibernation feature (OS/S4 sleep state). Configuration options: [Disabled] [Enabled] ACPI Sleep State [Both S1 and S3 available for OS to choose from] Allows you to set the ACPI Sleep state. Configuration options: [Suspend Disabled] [S1 only (CPU Stop Clock)] [S3 only (Suspend to RAM)] [Both S1 and S3 available for OS to choose from] 4-22 Chapter 4: BIOS setup