Asus PRIME Z270-AR PRIME_Z270-A_AR_BIOS ManualEnglish - Page 30

CPU Graphics Switching Frequency The switching frequency will affect the CPU Graphics transient response speed and the component thermal production. Configuration options: [Auto] [Manual] DO NOT remove the thermal module. The thermal conditions should be monitored. The following item appears only when you set the CPU Graphics Switching Frequency to [Manual]. Fixed CPU Graphics Switching Frequency(KHz) This item allows you to set a higher frequency for a quicker transient response speed. Use the or to adjust the value. The values range from 250 KHz to 500 KHz with an interval of 50 KHz. CPU Graphics Power Phase Control This item allows you to set the power phase control of the CPU Graphics. Configuration options: [Auto] [Standard] [Extreme] [Power Phase Response] DO NOT remove the thermal module when setting this item to [Power Phase Response] or [Extreme]. The thermal conditions should be monitored. Boot Voltages CPU Core/Cache Boot Voltage Configuration options: [Auto] [0.600] - [1.700] DMI Boot Voltage Configuration options: [Auto] [0.3000] - [1.9000] CPU System Agent Boot Voltage Configuration options: [Auto] [0.7000] - [1.8000] CPU VCCIO Boot Voltage Configuration options: [Auto] [0.9000] - [1.8000] CPU Standby Boot Voltage Configuration options: [Auto] [0.700] - [2.200] Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep(tm) Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production. Configuration options: [Auto] [Enabled] [Disabled] Turbo Mode Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit. Configuration options: [Disabled] [Enabled] 30 ASUS PRIME Z270-A/AR Series BIOS Manual