Asus PRIME Z270-AR PRIME_Z270-A_AR_BIOS ManualEnglish - Page 59
Boot up NumLock State, Above 4G Decoding, Wait For 'F1' If Error, Option ROM Messages
View all Asus PRIME Z270-AR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
The following item appears only when you set the Boot Logo Display to [Auto] and [Full Screen]. Post Delay Time This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds. This feature only works when set under normal boot. The following items appear only when you set the Boot Logo Display to [Disabled]. Post Report This item allows you to select a desired POST report waiting time. Configuration options: [1 sec] - [10 sec] [Until Press ESC] Boot up NumLock State This item allows you to enable or disable power-on state of the NumLock. Configuration options: [Disabled] [Enabled] Above 4G Decoding This item enables or disables 64-bit capable devices to be decoded in above 4G address space if your system supports 64-bit PCI Decoding. Configuration options: [Enabled] [Disabled] Wait For 'F1' If Error This item allows your system to wait for the key to be pressed when error occurs. Configuration options: [Disabled] [Enabled] Option ROM Messages [Enabled] The Option ROM Messages will be shown during the POST. [Disabled] Only the ASUS logo will be shown during the POST. Interrupt 19 Capture [Enabled] Execute the trap right away. [Disabled] Execute the trap during legacy boot. Setup Mode [Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST. [EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST. ASUS PRIME Z270-A/AR Series BIOS Manual 59