Asus PRIME Z270-AR PRIME_Z270-A_AR_BIOS ManualEnglish - Page 47
APM Configuration, ErP Ready, Restore AC Power Loss, Power On By PCI-E/PCI, Power On By Ring
View all Asus PRIME Z270-AR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
1.6.9 APM Configuration ErP Ready This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)] Restore AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCI-E/PCI This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] Power On By Ring This item allows you to enable or disable Ring to generate a wake event. Configuration options: [Disabled] [Enabled] Power On By RTC This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled] ASUS PRIME Z270-A/AR Series BIOS Manual 47