Asus ROG STRIX H270F GAMING STRIX H270F GAMING Users manual English - Page 75
PCH Storage Configuration, PCH-FW Configuration, Hot Plug [Disabled] SATA6G_1 Gray ~ SATA6G_6Gray
View all Asus ROG STRIX H270F GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
IOAPIC 24-119 Entries [Enabled] This item allows you to enable/disable the IOAPIC 24-119 Entries. IRQ24-119 may be used by PCH devices. Disabling those interrupts may cause certain devices to fail. Configuration options: [Enabled] [Disabled] PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. Hyper Kit Mode [Disabled] Disable this option for M.2 devices. Enable this option for ASUS Hyper Kit card. Configuration options: [Disabled] [Enabled] SATA Controller(s) [Enabled] This item allows you to enable or disable the SATA device. Configuration options: [Enabled] [Disabled] SATA Mode Selection This item allows you to set the SATA configuration. [AHCI] [Intel RST Premium With Intel Optane System Acceleration(RAID)] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. Set to [Intel RST Premium With Intel Optane System Acceleration(RAID)] when you want to create a RAID configuration from the SATA hard disk drives. Aggressive LPM Support [Disabled] This item appears only when you set the previous item to [AHCI] or [RAID] and allows you to enable or disable PCH entering link power state aggressively. Configuration options: [Disabled] [Enabled] SMART Self Test [On] SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] Hot Plug [Disabled] (SATA6G_1 (Gray) ~ SATA6G_6(Gray)) These items allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] PCH-FW Configuration TPM Device Selection [Discrete TPM] This item allows you to select the TPM device. Configuration options: [Discrete TPM] [Firmware TPM] Chapter 3 ASUS STRIX H270F GAMING 3-23