Asus ROG STRIX H270F GAMING STRIX H270F GAMING Users manual English - Page 82
AIO PUMP Control [Disabled], AIO PUMP Upper Temperature [70]
View all Asus ROG STRIX H270F GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Extension Fan 1/2/3 Profile [Standard] This item allows you to set the appropriate performance level of the extension fan. [Standard] Sets to [Standard] to make the extension fan automatically adjust depending on the chassis temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet extension fan operation. [Turbo] Sets to [Turbo] to achieve maximum extension fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following items appear only when you set Extension Fan 1/2/3 Profile to [Manual]. Extension Fan 1/2/3 Upper Temperature [70] Use the or keys to adjust the upper limit of the extension fan temperature. The values range from 20°C to 75°C. Extension Fan 1/2/3 Max. Duty Cycle(%) [100] Use the or keys to adjust the maximum extension fan duty cycle. The values range from 60% to 100%. When the chassis temperature reaches the upper limit, the extension fan will operate at the maximum duty cycle. Extension Fan 1/2/3 Middle Temperature [45] Use the or keys to set the value for Extension Fan Middle Temperature. Extension Fan 1/2/3 Middle Duty Cycle(%) [60] Use the or keys to adjust the extension fan middle duty cycle. The values range from 60% to 100%. Extension Fan 1/2/3 Lower Temperature [40] Use the or keys to adjust the extension fans' lower temperature. The values range from 0°C to 75°C. Extension Fan 1/2/3 Min. Duty Cycle(%) [60] Use the or keys to adjust the minimum extension fan duty cycle. The values range from 60% to 100%. When the CPU temperature is under the lower limit, the extension fan operates at the minimum duty cycle. Allow Fan Stop [Disabled] Allows the fan to run at 0% duty cycle when the temperature of the source is dropped below the lower temperature. AIO PUMP Control [Disabled] The subitems in this menu allows you to configure the AIO PUMP Control settings. [PWM mode] Enables the Q-Fan control feature in PWM mode for the 4-pin AIO pump fan. [DC mode] Enables the Q-Fan control feature in DC mode for the 3-pin AIO pump fan. [Disabled] Disables the Q-Fan control feature. The following items appear only when you set the AIO PUMP Control to [PWM Mode] or [DC Mode]. AIO PUMP Upper Temperature [70] Use the and keys to adjust the upper limit of the AIO pump fan temperature. The values range from 25ºC to 75ºC. Chapter 3 3-30 Chapter 3: BIOS Setup