Asus RS163-E4 RX4 User Guide - Page 37

on the transfer card.

Page 37 highlights

2. Using a screw driver to secure the three scews on the battery moduel cards. If there is no battery module card on your ZCR card, please skip step 1-2 and start from step 3. 3. Using a screw driver to remove the two screws that secures the bracket of the ZCR card. 4. Insert the ZCR card into the slot on the transfer card. 5. Put the two retaining poles into the holes on the system board. The two retaining poles are provided along with the ZCR card package. ASUS RS163-E4/RX4 2-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168

ASUS RS163-E4/RX4
±-1³
2. Using a screw driver to secure
the three scews on the battery
moduel cards.
If there is no battery module card on your ZCR card, please skip step 1-2
and start from step 3.
3. Using a screw driver to remove
the two screws that secures the
bracket of the ZCR card.
4. Insert the ZCR card into the slot
on the transfer card.
5. Put the two retaining poles into
the holes on the system board.
The two retaining poles are
provided along with the ZCR
card package.