Asus RS163-E4 RX4 User Guide - Page 56
to the optical drive.
View all Asus RS163-E4 RX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
10. Using a screw driver to remove the screws as shown, and remove the riser card. 11. Pull the optical drive carefully and remove it as shown. The IDE interface of this system is specially designed, please do notuse optical drive of other brands. Otherwise the optical drive might be damaged due to capatibility problem. Follow the steps below to reinstall the optical drive: 1. Place the optical drive in its place as shown. 2. Using a screw driver fasten the screws to secure the riser card to the optical drive. 3. Secure the three screws that secure the optical drive as shown. 4. Connect the cables and put back the front side of the front cover. 2-36 Chapter 2: Hardware setup
Chapter 2: Hardware setup
±-36
10. Using a screw driver to remove
the screws as shown, and
remove the riser card.
11. Pull the optical drive carefully
and remove it as shown.
The IDE interface of this
system is specially designed,
please do notuse optical
drive of other brands.
Otherwise the optical drive
might be damaged due to
capatibility problem.
Follow the steps below to reinstall
the optical drive:
1. Place the optical drive in its place
as shown.
2. Using a
screw driver fasten the
screws to secure the riser card
to the optical drive.
3. Secure the three screws that
secure the optical drive as
shown.
4. Connect the cables and put back
the front side of the front cover.