Asus RS163-E4 RX4 User Guide - Page 48
Set the power backplane board
View all Asus RS163-E4 RX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3. Remove the 8-pin power cable connected to the SAS/SATA backplane board. 4. Push the power backplane board as shown until it is completely removed from the motherboard. 5. Set the power backplane board aside. 6. Using a screw driver to remove the screw on the back of the power backplane board, then remove the PSU power backplane board. 2-28 Chapter 2: Hardware setup
Chapter 2: Hardware setup
±-±´
3. Remove the 8-pin power cable
connected to the SAS/SATA
backplane board.
4. Push the power backplane board
as shown until it is completely
removed from the motherboard.
5. Set the power backplane board
aside.
6. Using a screw driver to remove
the screw on the back of the
power backplane board, then
remove the PSU power backplane
board.