Asus RS163-E4 RX4 User Guide - Page 70
SAS/SATA RAID controller setting 3-pin RAID_EN2
View all Asus RS163-E4 RX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
8. SAS controller setting (3-pin SAS_EN2) These jumpers allow you to enable or disable the onboard LSI 1068 RAID controller. Set to pins 1-2 (Default) to activate the SAS RAID feature. ® KFN-DR/SAS KFN-DR/SAS SAS setting SAS_EN2 2 2 Enable (Default) Disable Sets jumpers to pins [2-3] will disable LSI SAS1068 controller and can't detect any SAS devices. 9. SAS/SATA RAID controller setting (3-pin RAID_EN2) These jumpers allow you to enable or disable the onboard SAS/SATA RAID controller. The default sets pins [1-2]. ® KFN-DR/SAS KFN-DR/SAS RAID setting RAID_EN2 2 2 Enable (Default) Disable 4- Chapter 4: Motherboard information
4-8
Chapter 4: Motherboard information
8. SAS controller setting (3-pin SAS_EN2)
These jumpers allow you to enable or disable the onboard LSI 1068 RAID
controller. Set to pins 1-2 (Default) to activate the SAS RAID feature.
9. SAS/SATA RAID controller setting (3-pin RAID_EN2)
These jumpers allow you to enable or disable the onboard SAS/SATA
RAID controller. The default sets pins [1-2].
Sets jumpers to pins [2-3] will disable LSI SAS1068 controller and can’t
detect any SAS devices.
KFN²-DR/SAS
KFN²-DR/SAS SAS setting
SAS_EN2
Enable
(Default)
Disable
±2
2³
KFN²-DR/SAS
KFN²-DR/SAS RAID setting
RAID_EN2
Enable
(Default)
Disable
±
2
2
³