Asus RS163-E4 RX4 User Guide - Page 38

Configuring an expansion card

Get Asus RS163-E4 RX4 PDF manuals and user guides View all Asus RS163-E4 RX4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

6. Insert the transfer card with the installed ZCR card into the transfer card slot on the system board. 7. Using two screws to secure the card with the retainng poles on the system board. *ZCR package contents: 1. LSI 8300 XLP Zero Channel RAID Card x 1 2. Riser card for ZCR card use x 1 3. Copper stand off and screws for ZCR card use 2.5.6 Configuring an expansion card After installing the expansion card, configure it by adjusting the software settings. 1. Turn on the system and change the BIOS IRQ settings, if any. 2. Assign an IRQ to the card. Refer to the following tables. 3. Install the software drivers for the expansion card. 2-18 Chapter 2: Hardware setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
Chapter 2: Hardware setup
±-1´
6. Insert the transfer card with
the installed ZCR card into the
transfer card slot on the system
board.
7. Using two screws to secure the
card with the retainng poles on
the system board.
2.5.6 Configuring an expansion card
After installing the expansion card, configure it by adjusting the software
settings.
1. Turn on the system and change the BIOS IRQ settings, if any.
2. Assign an IRQ to the card. Refer to the following tables.
3. Install the software drivers for the expansion card.
*ZCR package contents:
1. LSI 8300 XLP Zero Channel RAID Card x 1
2. Riser card for ZCR card use x 1
3. Copper stand off and screws for ZCR card use