Asus RS740-E7-RS24-EG User Guide - Page 42
the 3.5-inch SATA / SAS HDD., Remove the old 3.5-inch SATA / SAS
View all Asus RS740-E7-RS24-EG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3. Firmly hold the tray lever and carefully pull the drive tray out of the bay. Place the drive tray in a clean and flat surface. tray lever spring lock 2 3 4. Release the four (4) screws on the side of the 3.5-inch SATA / SAS HDD. Set aside the screws for later use. 5. Remove the old 3.5-inch SATA / SAS HDD from the tray. Prepare the new 3.5-inch SATA / SAS HDD. 6. Orient the new 3.5-inch SATA / SAS HDD with its SATA connector facing the rear then place the SATA / SAS HDD into the tray. Ensure that the four screw holes of the drive tray matches the screw holes of the 3.5-inch SATA / SAS HDD. 2-18 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-18
4.
Release the four (4) screws on the side of
the 3.5-inch SATA / SAS HDD.
Set aside the screws for later use.
3.
Firmly hold the tray lever and carefully pull the drive tray out of the bay. Place the drive
tray in a clean and flat surface.
5.
Remove the old 3.5-inch SATA / SAS
HDD from the tray.
Prepare the new 3.5-inch SATA / SAS
HDD.
6.
Orient the new 3.5-inch SATA / SAS
HDD with its SATA connector facing
the rear then place the SATA / SAS
HDD into the tray.
Ensure that the four screw holes of
the drive tray matches the screw
holes of the 3.5-inch SATA / SAS
HDD.
spring lock
tray lever
3
2