Asus S3N User Manual - Page 54
Internal 10/100 Network
View all Asus S3N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4 Using the Notebook PC Internal 10/100 Network Connect a network cable, with RJ-45 connectors on each end, to the network port on the Notebook PC and the other end to a hub or switch. For 10/100Mbps speeds, your network cable must be category 5 or better (not category 3) with twisted-pair wiring. If you plan on running the interface at 10/100Mbps, it must be connected to a 10BASE-T/100BASE-TX hub (not a BASE-T4 hub). For 10BASE-T, use category 3, 4, or 5 twisted-pair wiring. 10/100 Mbps Full-Duplex is supported on this Notebook PC but requires connection to a network switching hub with "duplex" enabled. The software default is to use the fastest setting so no user-intervention is required. Twisted-Pair Cable The cable used to connect the Ethernet card to a host (generally a Hub or Switch) is called a straightthrough Twisted Pair Ethernet (TPE). The end connectors are called RJ-45 connectors, which are not compatible with RJ-11 telephone connectors. If connecting two computers together without a hub in between, auto-crossover is supported on this Notebook PC so a crossover LAN cable is not required. Network Hub or Switch Network cable with RJ-45 connectors This is an example of the Notebook PC connected to a Network Hub or Switch for use with the built-in Ethernet controller. 53