Asus TS300-E10-PS4 User Manual - Page 62
Onboard LEDs, Standby Power LED SBPWR1, Baseboard Management Controller LED BMCLED1
![]() |
View all Asus TS300-E10-PS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4.2 Onboard LEDs 1. Standby Power LED (SBPWR1) The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. 2. Baseboard Management Controller LED (BMCLED1) The green heartbeat LED blinks per second to indicate that the ASMB9 is working normally. The BMC LED works with the ASUS ASMB9 management device and indicates its initiation status. When the PSU is plugged and the system is OFF, ASUS ASMB9 management device starts system initiation for about one (1) minute. The BMC LED blinks after system initiation finishes. • The heartbeat LED functions only when you install the ASUS ASMB9 management card. • Everytime after the AC power is replugged, you have to wait for about 60 seconds for the system to power up. ASUS TS300-E10-PS4/PS8 4-5
![](/manual_guide/products/asus-ts300e10ps4-user-manual-f440c9a/62.png)