Asus TS300-E10-PS4 User Manual - Page 69
Internal connectors, Serial ATA 6.0 Gbps connectors 7-pin SATA5-8
View all Asus TS300-E10-PS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
4.4 Internal connectors 1. Serial ATA 6.0 Gbps connectors (7-pin SATA5-8) Supported by the Intel® C236 chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 6Gb/s of data transfer rate. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 10, or RAID 5 configuration. • The actual data transfer rate depends on the speed of Serial ATA hard disks installed. • When the M.2 (NGFF1) is operating in SATA mode, SATA5 will be disabled. • When the M.2 (NGFF2) is operating in SATA mode, SATA6 will be disabled. 2. Hard disk activity LED connector (4-pin HDLED1) This LED connector is for the storage add-on card cable connected to the SATA or SAS add-on card. The read or write activities of any device connected to the SATA or SAS add-on card causes the front panel LED to light up. 4-12 Chapter 4: Motherboard Information