Asus TUF Z370-PLUS GAMING User Guide - Page 67
Internal CPU Power Management, Tweaker's Paradise, Long Duration Package Power Limit
View all Asus TUF Z370-PLUS GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
The GT power duty control adjusts the current and thermal conditions of every component's phase. [T. Probe] Select to maintain the VRM thermal balance. [Extreme] Select to maintain the current VRM balance. CPU Graphics Power Phase Control This item allows you to set the power phase control of GT. Configuration options: [Auto] [Standard] [Extreme] DO NOT remove the thermal module when setting this item to [Extreme]. The thermal conditions should be monitored. Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep(tm) Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production. Configuration options: [Auto] [Disabled] [Enabled] Turbo Mode Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit. Configuration options: [Disabled] [Enabled] The following three items appear only when you set the Turbo Mode to [Enabled]. Long Duration Package Power Limit Allows you to limit the Turbo Ratio's time duration that exceeds the TDP (Thermal Design Power) for maximum performance. Use the or keys to adjust the value. The values range from 1 W to 4095 W. Package Power Time Window Also known as Power Limit 1, this item allows you to maintain the time window for Turbo Ratio over TDP (Thermal Design Power). Use the or keys to adjust the value. The values range from 1 to 127 in seconds. Short Duration Package Power Limit Also known as Power Limit 2, this item allows you to provide rapid protection when the package power exceeds the Power Limit 1. Use the or keys to adjust the value. The values range from 1 W to 4095 W. IA AC Load Line [Auto] This item allows you to set the AC loadline defined in 1/100 mOhms. Use the and keys to adjust the value. Configuration options: [Auto] [0.01] - [62.49] IA DC Load Line] This item allows you to set the DC loadline defined in 1/100 mOhms. Use the and keys to adjust the value. Configuration options: [Auto] [0.01] - [62.49] Tweaker's Paradise The subitems in this menu allow you to set your motherboard configurations. Realtime Memory Timing Chapter 3 3-18 Chapter 3: BIOS Setup