Asus TUF Z370-PLUS GAMING User Guide - Page 73
System Agent (SA) Configuration, Above 4G Decoding, Graphics Configuration
View all Asus TUF Z370-PLUS GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Turbo Mode This item allows you to automatically set the CPU cores to run faster than the base operating frequency when it is below the operating power, current and temperature specification limit. Configuration options: [Disabled] [Enabled] CPU C-States This item allows you to set the power saving of the CPU states. Configuration options: [Auto] [Disabled] [Enabled] CFG Lock [Enabled] This item allows you to disable or enable the CFG Lock. Configuration options: [Enabled] [Disabled] 3.6.3 System Agent (SA) Configuration The items in this menu allow you to adjust the Link Speed for PEG Port and Multi-Monitor. Vt-d Allows you to enable the virtualization technology fundtion on the memory controller hub (MCH). Configuration options: [Enabled] [Disabled] Above 4G Decoding Allows you to enable or disable the above 4 G Address Space (Only if System Supports 64bit PCI Decoding). Configuration options: [Enabled] [Disabled] Graphics Configuration Allows you to select a primary display from CPU, PCIE and PCI graphical devices. Primary Display Allows you to select the primary display from CPU, PCIE and PCI graphics devices. Configuration options: [Auto] [CPU Graphics] [PCIE] iGPU Multi-Monitor This item allows you to empower both integrated and discrete graphics devices for the multi-monitor output. The CPU graphics shared system memory size is fixed at 64 MB. Configuration options: [Disabled] [Enabled] RC6(Render Standby) Allows you to enable or disable Intel® Graphics Render Standby support to reduce iGPU power use when the system is idle. Configuration options: [Disabled] [Enabled] DVMT Pre-Allocated Allows you to select the amount of system memory pre-allocated to DVMT 5.0 used by the internal graphics device. Configuration options: [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M] [288M] [320M]~ [480M] [512M] [1024M] DMI/OPI Configuration This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed. DMI Max Link Speed Allows you to configure the DMI speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] Chapter 3 3-24 Chapter 3: BIOS Setup