Asus TUF Z370-PLUS GAMING User Guide - Page 74
PCH Configuration, PEG Port Configuration, PCI Express Configuration, IOAPIC 24-119 Entries
View all Asus TUF Z370-PLUS GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
PEG Port Configuration Allows you to configure the PEG Port settings. PCIEx16_1 Link Speed Allows you to configure the PCIEx16 speed for slot 1. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] Memory Configuration Allows you to configure the memory configuration parameters. Memory Remap Set this item to [Enabled] to support DRAM address remapping for 64-bit operating systems. Configuration options: [Enabled] [Disabled] 3.6.4 PCH Configuration The items in this menu allow you to adjust the PCH PCI Express speed. PCI Express Configuration This item allows you to configure the PCI Express slots. IOAPIC 24-119 Entries This item allows your system to enable or disable IOAPIC 24-119 Entries. Configuration options: [Disabled] [Enabled] 3.6.5 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. SATA Controller(s) This item allows you to enable or disable the SATA Device. Configuration options: [Enabled] [Disabled] SATA Mode Selection This item allows you to set the SATA configuration. [AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. [Intel RST Premium With Intel Optane System Acceleration (RAID)] Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives. Chapter 3 ASUS TUF Z370-PLUS GAMING 3-25