Asus TX97-N TX97-N User Manual - Page 37

Details of Standard CMOS Setup

Get Asus TX97-N PDF manuals and user guides View all Asus TX97-N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

IV. BIOS SOFTWARE Details of Standard CMOS Setup: Date To set the date, highlight the "Date" field and then press either , , plus or minus signs (on the numeric keypad) to set the current date. Follow the month, day and year format. Valid values are Month: (1 to 12), Day: (1 to 31), Year: (up to 2079). Time To set the time, highlight the "Time" field and then press either , , plus or minus signs (on the numeric keypad) to set the current time. Follow the hour, minute and second format. Valid values are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59). NOTE: You can bypass the date and time prompts by creating an AUTOEXEC.BAT file. For information on how to create this file, please refer to the MS-DOS manual. IV. BIOS (Standard CMOS) Hard Disk Drives This field records the specifications for all non-SCSI hard disk drives installed in your system. The onboard PCI IDE connectors provide Primary and Secondary channels for connecting up to four IDE hard disks or other IDE devices. Each channel can support up to two hard disks; the first of which is the "master" and the second is the "slave". Specifications for SCSI hard disks need not to be entered here because they operate using device drivers and are not supported by any BIOS. If you install the optional PCI-SC200 SCSI controller card into the motherboard (see section VI for instructions). If you install other vendor's SCSI controller card, refer to the documentation that came with the card on how to install the required SCSI drivers. For IDE hard disk drive setup, you can: • Use the Auto setting for detection during bootup. • Use the IDE HDD AUTO DETECTION in the main menu to automatically enter the drive specifications. • Enter the specifications yourself manually by using the "User" option. The entries for specifying the hard disk type include CYLS (number of cylinders), HEAD (number of read/write heads), PRECOMP (write precompensation), LANDZ (landing zone), SECTOR (number of sectors) and MODE. The SIZE field automatically adjusts according to the configuration you specify. The documentation that came with your hard disk should provide you with the information regarding the drive specifications. ASUS TX97-N User's Manual 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
ASUS TX97-N User’s Manual
37
IV.
BIOS SOFTWARE
IV.
BIOS
(Standard CMOS)
Details of Standard CMOS Setup:
Date
To set the date, highlight the “Date” field and then press either <Page Up>, <Page
Down>, plus or minus signs (on the numeric keypad) to set the current date. Follow
the month, day and year format. Valid values are
Month: (1 to 12), Day: (1 to 31),
Year: (up to 2079)
.
Time
To set the time, highlight the “Time” field and then press either <Page Up>, <Page
Down>, plus or minus signs (on the numeric keypad)
to set the current time. Follow
the hour, minute and second format. Valid values are
Hour: (00 to 23), Minute: (00 to 59),
Second: (00 to 59)
.
NOTE:
You can bypass the date and time prompts by creating an AUTOEXEC.BAT
file. For information on how to create this file, please refer to the MS-DOS manual.
Hard Disk Drives
This field records the specifications for all non-SCSI hard disk drives installed in
your system. The onboard PCI IDE connectors provide Primary and Secondary chan-
nels for connecting up to four IDE hard disks or other IDE devices. Each channel
can support up to two hard disks; the first of which is the “master” and the second is
the “slave”.
Specifications for SCSI hard disks need not to be entered here because they operate
using device drivers and are not supported by any BIOS. If you install the optional
PCI-SC200 SCSI controller card into the motherboard (see section VI for instruc-
tions). If you install other vendor’s SCSI controller card, refer to the documentation
that came with the card on how to install the required SCSI drivers.
For IDE hard disk drive setup, you can:
•
Use the
Auto
setting for detection during bootup.
•
Use the IDE HDD AUTO DETECTION in the main menu to automatically
enter the drive specifications.
•
Enter the specifications yourself manually by using the “User” option.
The entries for specifying the hard disk type include
CYLS
(number of cylinders),
HEAD
(number of read/write heads),
PRECOMP
(write precompensation),
LANDZ
(landing zone),
SECTOR
(number of sectors) and
MODE
. The
SIZE
field auto-
matically adjusts according to the configuration you specify. The documentation
that came with your hard disk should provide you with the information regarding
the drive specifications.