Asus WL-500gP User Manual - Page 46
Host Name, MAC Address, Heart-Beat Serve, IP Address, Subnet Mask, Host Name, PPPoE MTU, PPPoE MRU,
UPC - 610839081684
View all Asus WL-500gP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 3 - Software Configuration PPPoE MTU - This field is shows the Maximum Transmission Unit (MTU) of PPPoE packets. PPPoE MRU - This field is shows the Maximum Receive Unit (MTU) of PPPoE packets. Enable PPPoE Relay - Enable PPPoE relay allows stations in LAN to setup individual PPPoE connections that are passthrough NAT. It is also known as PPPoE multi-session. WL500g WL500g Deluxe 3. Utilities Special Requirement from ISP The following two items may be specified by some ISPs. Check with your ISP and fill them in if required. Host Name - Fill this in if required by your ISP. MAC Address - Fill this in if required by your ISP. Heart-Beat Server (WL500g Deluxe) - Fill in the server name or server IP address when you are connecting with BigPond. LAN IP Setting IP Address - This is IP address of the Wireless Router as seen in your local network. The default value is 192.168.1.1. Subnet Mask - This is Subnet Mask of the Wireless Router as seen in your local network. The default value is 255.255.255.0. Host Name - This is Host Name of the Wireless Router as seen in your local network. 46 ASUS Wireless Router