Axis Communications M3026-VE M3026-VE Fixed Dome Network Camera - User Manual - Page 37
Recipients
View all Axis Communications M3026-VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
AXIS M3026-VE Fixed Dome Network Camera Events To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again. The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period. For more information, see the online help . Fallback Action A fallback action is started if the primary action cannot be started, for example if connection to a recipient cannot be established. Fallback actions are typically used to send email notifications on failed actions or to upload images to a secondary recipient. Recipients Recipients receive media files and notification messages. The following recipients are available: Recipient Email FTP HTTP Network Share TCP Use with action Send Images Send Notification Send Video Clip Send Images Send Video Clip Send Images Send Notification Send Video Clip Send Images Send Video Clip Send Notification Note A network share can also be used as a storage device for recorded video. Go to System Options > Storage to configure a network share before setting up a continuous recording or an action rule to record video. See Storage on page 48 for more information about storage devices. To add a recipient: 1. Go to Events > Recipients and click Add. 2. Enter a descriptive name. 3. Select a recipient Type. 4. Enter the information needed for the recipient type. 5. Click Test to test the connection to the recipient. 6. Click OK. 37