Axis Communications M3026-VE M3026-VE Fixed Dome Network Camera - User Manual - Page 49

AXIS M3026-VE Fixed Dome Network Camera System Options 1. Insert the SD card in the SD card slot. 2. Go to System Options > Storage and click SD Card. 3. Click Format and select the desired file system. Note During formatting any previous data stored on the disk will be lost. Mounting is done automatically when the card is inserted or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted. To unmount the SD card: 1. Go to System Options > Storage and click SD Card. 2. Click Unmount. 3. The card can now be removed. The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management. If the card's status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card. To avoid filling the card, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks. To stop writing to the card and protect recordings from being removed, select Lock under Recording Settings. Network Share Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common Internet File System) and use them for storage of recordings. To add a network share: 1. Go to System Options > Storage. 2. Click Network Share. 3. Enter the IP address, DNS or Bonjour name to the host server in the Host field. 4. Enter the name of the share in the Share field. Sub folders cannot be used. 5. If required, select The share requires login and enter the user name and password. 6. Click Connect. To clear all recordings and data from the Axis product's folder on the designated share, click Clear under Storage Tools. To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks. To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings. Ports & Devices I/O Ports The Axis product provides one input port and one output port for connection of external devices. For information on how to connect external devices, see Connectors on page 6 . 49