Axis Communications M7010 M7010 Video Encoder - User Manual - Page 25
Events
![]() |
View all Axis Communications M7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
AXIS M7010 Events Events The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule. Available Action Rule triggers and conditions include: • Applications - use installed applications to trigger the rule, see . • Detectors - Motion Detection - trigger the rule when motion is detected, see Motion Detection, on page 22. - Tampering - trigger the rule when tampering is detected, see Camera Tampering, on page 22. • Hardware - Video Signal - trigger the rule if video signal is lost. - Network - trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card. • Input Signal - Manual Trigger - trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View Page, on page 8 . This can for example be used to validate actions during product installation and configuration. • PTZ - Moving - trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation. - Preset Reached - trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position. • Storage - Available - trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications. - Full - trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full. - Locked - trigger the rule if the storage device is locked (write protected). • System - System Initializing - trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts. • Time - Recurrence - trigger the rule periodically, see Recurrences, on page 27. This can for example be used to upload an image every 5 minutes. - Use Schedule - trigger the rule according to the selected schedule, see Schedules, on page 27. Available actions include: • PTZ Control - Preset Position - go to a preset position. 25
![](/manual_guide/products/axis-communications-m7010-m7010-video-encoder-user-manual-0de6ddf/25.png)