Behringer ULTRA-DRIVE PRO DCX2496 Manual - Page 23

Stereo operation plus 2 subwoofers

Page 23 highlights

23 ULTRADRIVE PRO DCX2496 User Manual 6.5 Stereo operation plus 2 subwoofers In A In B Out 1 2 3 4 (5 and 6 not used) Left Stereo output Right XENYX X2222USB Mixing console EUROLIVE B1220 PRO EUROPOWER EP2000 Stereo power ampli er Left passive loudspeaker High (2) Right passive loudspeaker High (4) EUROLIVE B1800X PRO Low (3) Low (1) Left active subwoofer Right passive subwoofer Output 5 + 6 usable as additional mono delay line outputs. Fig. 6.5: Stereo operation plus 2 woofer cabinets Only two frequency ranges (Low and High) are used on each stereo side. The two passive speaker cabinets for the higher frequencies are limited towards the bass end and are fine-tuned in their sound with the DCX's internal equalizer. The stereo bass signal is first sent to the active woofer, which also provides the passive woofer cabinet with sufficient power for the right-hand low-frequency channel. The unused outputs 5 and 6 can be used as mono delay lines.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

23
ULTRADRIVE PRO DCX2496 User Manual
6.5
Stereo operation plus 2 subwoofers
Output 5 + 6 usable as additional mono delay line outputs.
XENYX X2222USB Mixing console
Left
In A
Out
1
2
3
4
(5 and 6 not used)
EUROPOWER EP2000
Stereo power amplifier
EUROLIVE
B1220 PRO
Left passive
loudspeaker
Right passive
loudspeaker
In B
Stereo output
Right
High (2)
High (4)
EUROLIVE B1800X PRO
Left active subwoofer
Right passive subwoofer
Low (3)
Low (1)
Fig. 6.5: Stereo operation plus 2 woofer cabinets
Only two frequency ranges (Low and High) are used on each stereo side. The two passive speaker cabinets for the higher frequencies are limited towards the bass end
and are fine-tuned in their sound with the DCX’s internal equalizer. The stereo bass signal is first sent to the active woofer, which also provides the passive woofer
cabinet with sufficient power for the right-hand low-frequency channel. The unused outputs 5 and 6 can be used as mono delay lines.