Beko WMI71641 User Manual - Page 23

special programs. • If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated due to an excessive unbalanced distribution of laundry in the machine. Changing the selections after the program has started The selected spin speed and program temperature fade out. An empty frame appears. When the "Program selection" button is brought to the appropriate position, rpm and temperature data reappear. Switching the machine to standby mode The machine is switched to standby mode by pressing "Start/Pause/Cancel" button momentarily. The Standby symbol which indicates the machine is in standby mode lights up and the start symbol that shows the program has started and is still continuing fades out. the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed to open. You may open the door after the symbol fades out. Child-proof lock Protect the appliance from being tampered by children by means of the child-proof lock. In this case, no change can be made in the running program. C Your machine can be turned on and off with On/Off button while the childproof lock is activated. In this case, your machine will resume its program with child-proof lock activated. The machine is switched to child-lock by pressing the 2nd and 4th auxiliary functions for 3 sec. "C:on" (Child-proof lock is activated) label appears on the display. F1 F2 F3 F4 Selecting or cancelling an auxiliary function in pause mode Auxiliary functions can be cancelled or selected in accordance with the step the program is at. The same symbol will also be displayed whenever any button is pressed while the machine is child-locked. To deactivate the child-proof lock, press the 2nd and 4th auxiliary function buttons for 3 sec. "C:OFF" (Child-proof lock is deactivated) label appears on the screen. Adding/removing laundry in pause mode The door can be opened if the water level is suitable. The door locked symbol will light up until the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door. Door lock The Door Locked Symbol lights up when Ending the program through cancelling "Start/Pause/Cancel" button is pressed for 3 seconds to cancel the program. Start symbol will flash during cancellation. After cancellation, the symbol of the corresponding step at which the cancellation was made will remain lit and "End" will appear on the screen. 23 EN