Beko WMI71641 User Manual - Page 26

7 Maintenance and cleaning Detergent Drawer Remove any powder residue build up in the drawer. To do this; 2 1 3 4 1. You can remove the detergent drawer by pulling it towards yourself strongly. C If more than a normal amount of softener and liquid detergent mixture starts to remain in the softener compartment, the siphon must be cleaned. 2. Wash the drawer and the siphon with plenty of lukewarm water in a washbasin. Wear protective gloves or use an appropriate brush to avoid touching the residues in the drawer when cleaning. 3. Replace the drawer into its housing after cleaning. Check if the siphon is in its original location. The loading door and the drum After each wash: • Check if there are any foreign substances in the drum. • Open the hole in the bellow with the aid of a toothpick if it is clogged. C Foreign metal substances in your machine can cause rust stains. In such cases: Clean the drum with a stainless steel cleaning agent. Never use steel wool or wire wool. Body and control panel When necessary: • Wipe the exterior panels of your machine with soapy water or mild detergent. Dry it with a soft cloth. • Use only a soft and damp cloth to clean the control panel. A Never use a sponge or scrubbing material. These will damage the painted and plastic parts. Inlet water filters There is a filter at the end of each water intake valve at the back side of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent the foreign substances and dirt in the water to enter into the machine. Filters should be cleaned as they get dirty. 26 EN