Belkin F1UP0002uk User Manual - Page 129
Troubleshooting
View all Belkin F1UP0002uk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Troubleshooting 1 1. This product is not found even after searching by the Belkin All-In-One Print Manager. 2 • Check if the power adapter and the network cable are connected to the Print Server properly. 3 • Check if the LAN or WLAN LED is turned on. • Check if the IP address of the Print Server is in 4 the network segment as your computer. - If you are not sure of the Print Server's IPaddress setting, check the TCP/IP setting of the 5 Print Server from the Server Manager. 6 2. Following are instructions on how to 7 change the Print Server's IP address: • A DHCP server is installed in the network. 8 If a DHCP server is installed, you can choose to allow the Print Server to get an IP address 9 from the DHCP server automatically. 1. Open "Server Manager" and then select "TCP/IP" setting. 10 2. Select "Auto IP" and click "Save". 3. Reboot the All-In-One Print Server. 11 12 13 14 15 16 129 17 section