Belkin F1UP0002uk User Manual - Page 58
Infrastructure
![]() |
View all Belkin F1UP0002uk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Print Server Manager section 1 Infrastructure Mode: 2 3 4 5 6 7 In the Infrastructure mode, you have to allow the Print Server to associate with an access point. You can choose to let the Print 8 Server scan for an available access point automatically, or you can manually assign the SSID of the access point you want to use. 9 If you select to allow the Print Server to scan 10 for an available access point, the 11 following window will pop up. 12 13 14 15 The table will list the available access points near the Print Server. Select an access point from the list and click "Next". If you cannot find the access point that you want to use, click "Scan" to allow the 16 Print Server to scan again. 17 58
![](/manual_guide/products/belkin-f1up0002uk-user-manual-a06f265/58.png)
58
12
13
14
15
16
17
Infrastructure
Mode:
Print Server Manager
1
2
3
4
5
6
7
8
9
10
11
section
In the Infrastructure mode, you have to allow the Print Server to
associate with an access point. You can choose to let the Print
Server scan for an available access point automatically, or you can
manually assign the SSID of the access point you want to use.
The table will list the available access points near the Print Server.
Select an access point from the list and click “Next”. If you cannot
find the access point that you want to use, click “Scan” to allow the
Print Server to scan again.
If you select to
allow the Print
Server to scan
for an available
access point, the
following window
will pop up.