Belkin F1UP0002uk User Manual - Page 56

Print Server Manager section 1 Wireless Function: You can select to enable or disable the wireless 2 function manually. If you manually enable wireless function, the Print Server's wireless LAN will be always enabled and Ethernet will be always disabled. If you manually disable the wireless function, the 3 Print Server's wireless LAN will be always disabled and Ethernet will be always enabled. You can also select "Auto" to let the Print Server automatically decide to enable or disable the wireless function. The 4 Print Server only can work in either Ethernet or wireless-LAN mode. It cannot work in both Ethernet and wireless-LAN mode at the same 5 time. When the Print Server starts up, it will automatically detect if the LAN port is connected to an active network by an Ethernet cable. If the Print Server is connected to an active network by Ethernet 6 cable when starting up, the Print Server will run in Ethernet mode. If the Print Server is not connected to an active network by Ethernet cable when starting up, the Print Server will run in wireless-LAN 7 mode. The Print Server's default is in "Auto" mode. 8 Domain Country: The wireless channels are different from country to country. Generally, the channels are from 1 to 11 in the USA and 9 from 1 to 13 in Europe. The operating channel will be set to the Print Server before importing. If you are in a different country, make sure that you have set the available channels according to your location 10 11 Wireless Configuration If you want to use the Print Server through a wireless LAN, set it 12 up through Ethernet first and make sure your wireless-LAN setting is correct. After setting up the wireless LAN, unplug the Ethernet 13 cable and restart the Print Server. You can start to use the Print Server through a wireless LAN. If the wireless configuration does not work, plug in the Ethernet cable again, restart the Print Server, 14 and configure it through Ethernet until the wireless-LAN settings are correct. 15 16 17 56