Belkin F1UP0002uk User Manual - Page 16
the Dynamic Host Configuration Protocol DHCP
View all Belkin F1UP0002uk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installation Procedure section 10. To set up the IP address of the Print Server, the default 1 is set to "DHCP" for the TCP/IP configuration. 2 3 4 5 6 7 8 The Print Server by default will try to get an IP 9 address from the connected Belkin Router running the Dynamic Host Configuration Protocol (DHCP) 10 server and the following screen will appear. 11 12 13 The newly assigned TCP/IP settings will be displayed in the "TCP/IP Configuration" window for your reference. Click 14 "Next" to continue on to step 3 in the installation process. 15 16 17 16
16
12
13
14
15
16
17
Installation Procedure
10.
To set up the IP address of the Print Server, the default
is set to “DHCP” for the TCP/IP configuration.
The Print Server by default will try to get an IP
address from the connected Belkin Router running
the Dynamic Host Configuration Protocol (DHCP)
server and the following screen will appear.
The newly assigned TCP/IP settings will be displayed in the
“TCP/IP Configuration” window for your reference. Click
“Next” to continue on to step 3 in the installation process.
1
2
3
4
5
6
7
8
9
10
11
section