Belkin F1UP0002uk User Manual - Page 78
Utilities
![]() |
View all Belkin F1UP0002uk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Web Management section 1 Auto - There is another option called "Auto" for the internal 2 DHCP server. "Auto" means that the Print Server will first search for and detect DHCP servers within the network automatically. If a DHCP server exists on the network, the 3 internal DHCP server will stay idle (disabled) and would not respond back to DHCP requests that it receives from clients. If a DHCP server doesn' t exist on the network, the Print 4 Server will turn on its own internal DHCP server and assign IP addresses to clients. In this case, the internal DHCP server 5 will also assign the first IP address to the Print Server only if the static IP option is not selected on this page, as static IP takes precedence. Fill in the "Starting Address", "Range", 6 "Subnet Mask", "Gateway", and "DNS" fields; then the Print Server will assign a unique IP address to each DHCP client. 7 Note: After configuring the Print Server, you have to click 8 "Save Changes" to save the settings and restart the system. Utilities 9 Load Factory Defaults 10 This page allows the user to restore factory defaults on the Print Server by erasing all the previous configurations. 11 12 13 14 15 16 17 78
![](/manual_guide/products/belkin-f1up0002uk-user-manual-a06f265/78.png)