BenQ 4012EU User Guide - Page 10
s BIOS Basic Input and Output System - driver
View all BenQ 4012EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. Once you finish the above steps, the system will automatically detect the presence of the CD-Rewriter. Please finish the driver's installation according to the computer's instruction (the driver software is on the attached 1.44MB disk). After rebooting, the computer system will automatically recognize the CD-Rewriter. (Additional software programs, provided with the product, can be installed. For additional information on installing and using software and hardware, please refer to the product's Instruction Manual as well as the User Manual enclosed in the CD-ROM.) N o te If the "New hardware help" box does not show up after the CD-Rewriter is connected to the computer, it is possible that the USB slot is not in order. Please reboot your computer and enter the main board's BIOS (Basic Input and Output System) to check whether the USB is disabled or not. If the USB is disabled, change the setting to enabled. N o te Once you complete the installation of the USB driver, the computer will recognize the CD-Rewriter every time you connect the USB cable to it. User can start operating directly. 6. By using the vertical stand, you can place the CD-Rewriter in various ways to make the most use of your space. 7. After finishing all the steps above, please de-install the product in the reverse order of step 3 to 1. User's Manual E-7