BenQ 4012EU User Guide - Page 12
Operation Instructions
View all BenQ 4012EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operation Instructions Load a CD disc Press the eject button on the CD-ReWriter front panel and the tray will eject automatically. Put the CD disc in the tray with the labeled side up. Press the eject button or slightly push on the front of the tray to close the tray. When a CD disc is loaded, you should be able to read files properly on the disc within a program. Removing a CD disc Press the eject button on the CD-ReWriter front panel. Remove CD disc from the tray. Press the eject button or slightly push on the front of the tray to close the tray. Maintenance Typically, the CD-ReWriter needs no maintenance or cleaning. Most problems will be prevented if you keep CD discs clean. Use lens-cleaning cloth to slightly wipe away dusts on disc surface and avoid scratching it. Emergency Eject If the tray does not eject automatically, you may manually pull out the tray. Follow these steps: ♦ Switch off the power. ♦ Insert a straightened paper clip into the emergency hole (please refer to the illustration in Front View). The tray will be partially ejected. ♦ Gently pull out the tray. User's Manual E-9