BenQ DC 3400 User Manual - Page 20

BenQ DC 3400 User's Manual Adjusting LCD Display Brightness By default, the DC 3400 LCD display brightness is set to "Bright". This setting is useful when using the camera outdoors or under bright lights. To maximize battery use, however, you can set the LCD display brightness to "Normal". 1. Enter the setup menu as described above and press to select the LCD Brightness menu icon. 2. Use and to choose between Bright and Normal . 3. Press the Menu MENU button to confirm your selection. Setting the Video Format Although the DC 3400's video format is preset at the factory Regional Video Formats: to suit the region of purchase, you can change the DC NTSC: USA, Japan, Canada, 3400's video format if necessary. Taiwan This setting is important when you connect the DC 3400 to a PAL: Europe, Australia, Asia monitor or television. (excl. Taiwan) 1. Enter the setup menu as described above and press to select the Video Format menu icon. 2. Use and to choose between NTSC and PAL . 3. Press the Menu MENU button to confirm your selection. Turning Power Saving Mode On or Off Power saving mode conserves battery life by turning the LCD display off after three minutes of inactivity and turning the camera power off after five minutes. 1. Enter the setup menu as described above and press to select the Power Saving menu icon. 2. Use and to choose between On and Off . 3. Press the Menu MENU button to confirm your selection. Restoring Default Settings You can restore the DC 3400's default factory settings at any time. Restoring default settings overrides any settings you have made in the past. 1. Enter the setup menu and press to select the Reset Default menu icon. 2. Press the Set SET to enter the confirmation menu. Select Yes or No and press the Menu MENU button to confirm your selection. 18