BenQ W7000 User Manual - Page 18
Connecting component-video devices, Connecting S-Video or video devices - avs
View all BenQ W7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connecting component-video devices Be sure to match the corresponding colors between the cables and the terminals. The RCA type component video jacks are provided for connection to video output devices. You should also connect the separate audio cable to a suitable audio amplifier. AV equipment: DVD player, digital tuner, etc. From audio output terminals To audio input terminals Component video cable Connecting S-Video or video devices You need only connect S-Video or composite Video cable from the same device, never both at the same time. You should also connect the separate audio cable to a suitable audio amplifier. AV equipment From audio output To audio input terminals terminals S-Video cable or Video cable • If you have already made a Component Video connection between the projector and the video source device, you need not connect to this device again using an S-Video or composite Video connection as this makes an unnecessary second connection of poorer picture quality. You need only connect using a composite Video connection if both Component Video and S-Video are not supplied on the video source device (for example, with some analog video cameras). • If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, please check that the video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly. 18 Connecting with video equipment