BenQ W7000 User Manual - Page 40

Picture -- Basic menu Function Description Preset Mode Load Settings From Brightness Contrast Color Tint Sharpness Pre-defined picture modes are provided so you can optimize your projector picture set-up to suit your program type. See "Selecting a preset mode" on page 26 for details. Selects a preset mode that most suits your need for the picture quality and further fine-tune the picture based on the selections listed below. See "Setting the User 1/User 2/User 3 mode" on page 27 for details. Adjusts the brightness of the picture. See "Adjusting Brightness" on page 28 for details. Adjusts the degree of difference between dark and light in the picture. See "Adjusting Contrast" on page 28 for details. Adjusts the color saturation level -- the amount of each color in a video picture. See "Adjusting Color" on page 28 for details. Adjusts the red and green color tones of the picture. See "Adjusting Tint" on page 28 for details. Adjusts the picture to make it look sharper or softer. See "Adjusting Sharpness" on page 28 for details. Flesh Tone See "Adjusting Flesh Tone" on page 28 for details. Returns all settings in the Picture -- Basic and Picture -- Advanced menus Reset Picture Settings to the factory preset values. See "Resetting the picture mode" on page 27 for details. Picture -- Advanced menu Function Black Level Clarity Control Color Temperature Color Temperature Fine Tuning Description Sets the picture grayscale as 0 IRE or 7.5 IRE. See "Setting Black Level" on page 29 for details. Adjusts the picture clarity. See "Controlling image clarity" on page 29 for details. There are several color temperature settings available. See "Selecting a color temperature*" on page 29 for details. See "Setting a preferred color temperature" on page 30 for details. Gamma Selection See "Selecting a Gamma setting" on page 30 for details. Brilliant Color See "Adjusting Brilliant Color" on page 30 for details. Color Management See "Color Management" on page 31 for details. Film Mode See "Setting Film Mode" on page 32 for details. 3D Comb Filter Dynamic Black See "Setting 3D Comb Filter" on page 32 for details. Automatically changes the black level of the projected pictures to enhance the effect of contrast ratio. 40 Connecting with video equipment