BenQ W7000 User Manual - Page 45

Lamp information, Getting to know the lamp hour, Extending lamp life

Page 45 highlights

Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows: Equivalent lamp hour = 1 (hours used in Economic mode) + 3/2 (hours used in Normal mode) See "Setting Lamp Power as Economic" below for more information on Economic mode. To obtain the lamp hour information: 1. Press MENU and then press / until the Advanced Setup menu is highlighted. 2. Press to highlight Lamp Settings and press ENTER. The Lamp Settings page displays. 3. The lamp hour information is shown in the row of Equivalent Lamp Hour. 4. To leave the menu, press MENU. Extending lamp life Advanced Setup Lamp Settings HDMI Settings Baud Rate Test Pattern High Altitude Mode Password Key Lock Reset All Settings ISF S-Video Lamp Settings Lamp Power Reset Lamp Timer Equivalent Lamp Hour ENTER 115200 Off Off Back Economic 50 Back The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the following settings via the OSD menu. • Setting Lamp Power as Economic Using Economic mode reduces system noise and power consumption. If the Economic mode is selected, the light output will be reduced and result in darker projected pictures. Setting the projector in Economic mode also extends the lamp life. To set Economic mode, go to the Advanced Setup > Lamp Settings > Lamp Power menu and press / . • Setting Auto Off This function allows the projector to turn off automatically if no input source is detected after a set period of time. To set Auto Off, go to the System Setup > Auto Off menu and press / to select a time period. The time period can be set from 5 to 30 minutes in 5-minute increments. If the preset time lengths are not suitable for your presentation, select Disable. The projector will not automatically shut down in a certain time period. System Setup Language Splash Screen Projector Position Auto Off Sleep Timer Menu Settings Input Source Auto Source Search S-Video English BenQ Front Table Disable Disable On Back Connecting with video equipment 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

45
Connecting with video equipment
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp
usage is automatically calculated by the built-in timer. The method of
calculating the equivalent lamp hour is as follows:
Equivalent lamp hour
= 1 (hours used in
Economic
mode) + 3/2 (hours used in
Normal
mode)
See
"Setting Lamp Power as Economic"
below for more information on
Economic mode.
To obtain the lamp hour information:
1.
Press
MENU
and then press
/
until the
Advanced Setup
menu
is highlighted.
2.
Press
to highlight
Lamp Settings
and press
ENTER
. The
Lamp
Settings
page displays.
3.
The lamp hour information is shown in the row of
Equivalent
Lamp Hour
.
4.
To leave the menu, press
MENU
.
Extending lamp life
The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the
following settings via the OSD menu.
Setting Lamp Power as Economic
Using
Economic
mode reduces system noise and power consumption. If the
Economic
mode is
selected, the light output will be reduced and result in darker projected pictures.
Setting the projector in
Economic
mode also extends the lamp life. To set
Economic
mode, go to the
Advanced Setup
>
Lamp Settings
>
Lamp Power
menu and press
/
.
Setting Auto Off
This function allows the projector to turn off automatically if no input
source is detected after a set period of time.
To set
Auto Off
, go to the
System Setup
>
Auto Off
menu and press
/
to select a time period. The time period can be set from 5 to 30
minutes in 5-minute increments. If the preset time lengths are not
suitable for your presentation, select
Disable
. The projector will not
automatically shut down in a certain time period.
Lamp Settings
Test Pattern
High Altitude Mode
Password
Key Lock
Reset All Settings
Advanced Setup
Back
S-Video
ENTER
Off
Lamp Settings
Lamp Power
Equivalent Lamp Hour
Back
Reset Lamp Timer
Economic
HDMI Settings
ISF
Baud Rate
115200
50
Off
Language
Splash Screen
Projector Position
Auto Off
Sleep Timer
Menu Settings
Input Source
System Setup
S-Video
English
BenQ
Auto Source Search
Back
Disable
Disable
On
Front Table