Bernina 531 Manual - Page 30
sewing, buttonholes, machine, adjusted, follows
View all Bernina 531 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
For sewing buttonholes, the machine is adjusted as follows: 1. Insert buttonhole presser foot. 2. Feed-change knob 17 (Fig.2, page 6) must stand at "sewing". 3. Push lever a (Fig. 28 and 29) to the back in the direction that it conies into the position shown in Fig. 30. of the arrow, in order In this way the locking catch c (Fig. 30), which determines the width of stitch for the bead and for the lock, comes into its working position. = 7. Fig. 29 Lever set for zig-zag sewing 54 Fig. 30 Lever net for buttonhole sewing 4. The stitch length lever 15 (Fig.28) has two marks on its ball-shaped end, the zig-zag mark Fig. 31 and the buttonhole mark Fig. 32. Fig. 31 Buttonhole device disengaged (zig-zag mark) aft Fig. 32 Mier Buttonhole device engaged (buttonhole mark) Fig. 33 With thumb and forefinger, the stitch length lever 16 (Fig. 33) is pressed as far as possible towards the machine in the direction of the arrow. 55