Bernina 531 Manual - Page 39
Applique
View all Bernina 531 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Figs. 47 a, b and c clearly illustrate the opera- ; J tion. As shown by Fig.47 a, the wool is inserted in the slot of the foot, and the thread end allowed to project over the rear edge of the fuut by about Vtinch. Now span the hole with wool as shown in Fig, b. Start at the left hand top corner of the damaged area and stretch wool L.. sideways, i. e. from left to right and vice-versa, run by run, by shifting the fabric accordingly. At the end of each ran a zigzag stitch will tack the wool to the fabric when direction of movement is changed. Make sure that. these runs are as close as possible, because later on no wool will be used. As soon as the damaged area is entirely covered with wool, the wool thread is cut at the darning foot. Now fasten the wool rows with zigzag stitches across them as shown in Fig. c, by shifting fabric forward and backward. Zigzag stitch is employed to ensure that, the mend remains elastic, and care should be taken not to place the individual zigzag runs too closely together. 72 Applique Work (N,one , Pt pwrtion for left-hand stitch) An attractive decorative effect is obtained by sewing cut-outs of materials of different colours or tulle to the cloth. Applique work is employed mainly on collars, ladies' and children's dresses, linen, and the like. The buttonhole presser foot is advantageously employed for this type of work. First draw the shapes to the under side of the material. The fabric from which the designs are cut should be of a pleasant contrast. colour. Cut piece slightly larger than required and baste on the right side of the material. Then sew a narrow (1 •11/2 ) zigzag stitch row (not too short) along the shapes. The sewing thread should be of the same colour as the fabric applied. Then remove basting and trim along sewing line on right side. Now finish work by sewing a wider (2112), short zigzag line over the edges of the cut-out on the right side of the material. Fig. 48