Bosch B18IF800SP Installation Instructions - Page 14
Pushing the appliance into the installation niche, CAUTION, WARNING
View all Bosch B18IF800SP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
en-us 1. Pushing the appliance into the installation niche , CAUTION: Caution when pushing the appliance into the installation niche. Do not damage the water line or power cord. Note: When the floor or the appliance is not leveled in comparison to the installation niche adjust height adjustable wheels before you move the appliance into the installation niche. 1. Remove the base panel. 2. Raise the height-adjustable wheels at the back by approx. 3/8" (10 mm). 3. Put the electric plug into the socket. 4. Push the water line into the guard tube (a) at the rear of the appliance. , WARNING: Be careful, otherwise people who are helping may be injured or the appliance may be damaged. The appliance may tip over while the water line is pushing into the guard tube (a). 5. To prevent the power cord from becoming caught, tie a piece of string to the middle of the power cord and feed forwards over the top of the appliance. When pushing in the appliance, pull the cable upwards. Take care not to pinch the power cord or using adhesive tape, tape the power cord to the floor centrally behind the appliance approx. 15" (380 mm) away from the rear panel of the installation niche. 6. Carefully push the appliance into the installation niche. 7. Remove edge protection (if attached). 14