Bosch B18IF800SP Installation Instructions - Page 20

Attaching the door panel, Adjust the door panel using the double threaded

Get Bosch B18IF800SP PDF manuals and user guides View all Bosch B18IF800SP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

en-us 9. Screw on the fixation strips. 2. Insert removed fixing brackets (a) into the adjusting rails (b) on the door panel. 9. Attaching the door panel Note: Now attach the furniture handles which are screwed from behind! 1. Remove the fixing brackets (a) from the appliance door. To do this, loosen the bracket screws (b) only. 3. Open the appliance door. 4. Hang the door panel with adjusting rail over the double threaded bolts. 5. Lower door panel and push the fixing brackets down over the fastening screws. 6. Adjust the door panel using the double threaded bolts (Torx screwdriver). Re-examine the dimensions of the gap continuously. 7. Close the door and check that the depth of the door panel is aligned with the adjacent fronts. If required, correct. 8. Tighten the bracket screws to fix the depth alignment. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
en-us
20
9.
Screw on the fixation strips.
9.
Attaching the door panel
Note:
Now attach the furniture handles which are screwed
from behind!
1.
Remove the fixing brackets (
a
) from the appliance
door. To do this, loosen the bracket screws (
b
)
only.
2.
Insert removed fixing brackets (
a
) into the
adjusting rails (
b
) on the door panel.
3.
Open the appliance door.
4.
Hang the door panel with adjusting rail over the
double threaded bolts.
5.
Lower door panel and push the fixing brackets
down over the fastening screws.
6.
Adjust the door panel using the double threaded
bolts (Torx screwdriver). Re-examine the
dimensions of the gap continuously.
7.
Close the door and check that the depth of the
door panel is aligned with the adjacent fronts.
If required, correct.
8.
Tighten the bracket screws to fix the depth
alignment.