Bosch B18IF800SP Installation Instructions - Page 5
Installation options, Individual appliance, Side-by-Side, Individual appliances with partition
View all Bosch B18IF800SP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation options There are many different installation options. These are limited only by the design of the kitchen. See also "Kitchen Design Quick Reference". Individual appliance en-us Individual appliances with partition Side-by-Side If two appliances are set up next to each other, a sealing kit for Side-by-Side combination should be used in order to guarantee a stable connection. For further information see chapter "Required accessories and tools". ■ When dimensioning the partition for model 4, note the thickness of the door panels to prevent damage if the doors are opened at the same time. ■ Use the Heater Kit for Side-by-Side Installation if the gap between the appliances is less than 6" (160 mm). ■ See chapter "Required accessories and tools", section "Optional accessories". ■ Minimum thickness of the partition 5/8" (16 mm). Individual appliance at the end of the kitchen If one side of the appliance is visible, a side panel must be used. The side panel must be connected firmly to the wall, the floor and overhead cabinet/fixtures before the appliance is placed in the installation niche. The dimensions of the side panel are taken from the opposite installation niche wall. During installation ensure that the installation niche is square and the proper size. 5