Bosch B18IF800SP Installation Instructions - Page 16
Attaching the appliance to the installation niche, Attach the cover strip
View all Bosch B18IF800SP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
en-us 3. Attaching the appliance to the installation niche It is essential to attach the appliance to the top of the installation niche. 1. Screw the attachment plate lugs (top) to the overhead furniture. 2. If there is a fairly large gap above the appliance, fit a wooden beam above the appliance, ensuring that the wooden beam fits the gap exactly. 5. Shorten the fitting strip (a) to fill the gap. Note: The appliance will be damaged if the fitting strip (a) is too long. 6. Press the fitting strip (a) into the cover strip (b). 7. Attach the cover strip (b) to the attachment plate (top). 3. If there is enough room on the top of the appliance, fix the attachment plate side lugs (top) to the side of the niche. 4. Screw on the bars of the fastening sheets (lateral) with the cabinet parts located next to them. Note: In the case of a Side-by-Side installation this installation step is not possible. These parts have been removed. Note: In the case of a side-by-side installation connect both cover rails to the bolt included in the installation accessories for side-by-side installation. The following are special installation steps. Instructions are provided after chapter C. ■ Connecting the water, see "Connecting the water to the appliance". 16