Bosch NWD-455V03-20P Operating Instructions - Page 49
Profile name, Target data rate, Encoding interval, Video resolution, Default, Details
View all Bosch NWD-455V03-20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
FlexiDome IP Configuration via the browser | en 49 Profile name You can enter a new name for the profile here. The name is then displayed in the list of available profiles in the Active encoder profile: field. Target data rate To optimize utilization of the bandwidth in your network, you can limit the data rate for the camera. The target data rate should be set according to the desired picture quality for typical scenes with no excessive motion. For complex images or frequent changes of image content due to frequent movements, this limit can temporarily be exceeded as far as the value you enter in the Max. data rate: field. Encoding interval The figure selected here determines the interval at which images are encoded and transmitted. For example, entering 4 means that only every fourth image is encoded, the following three images are skipped - this can be particularly advantageous with low bandwidths. The image rate in IPS (Images Per Second) is displayed next to the text block. Video resolution Here, you can select the desired resolution for the MPEG-4 video image. The following resolutions are available: - QCIF 176 × 144/120 pixels - CIF 352 × 288/240 pixels - 1/2 D1 352 × 576/480 pixels - 2CIF 704 × 288/240 pixels - 4CIF/D1 704 × 576/480 pixels - 2/3 D1 464 × 576/480 pixels Default Click Default to return the profile to the factory default values. Details Click Details to display further settings for image quality and communication parameters. These settings require familiarity Bosch Security Systems Operating Instructions V 1.0 | 2006.12