Bosch NWD-455V03-20P Operating Instructions - Page 99
Malfunction, Possible causes, Solution
View all Bosch NWD-455V03-20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
FlexiDome IP Troubleshooting | en 99 Malfunction Possible causes Solution The unit does not Alarm source is not Select possible alarm sources on report an alarm. selected. the Alarm sources configuration page. No alarm response speci- Specify the desired alarm fied. response on the Alarm connec- tions configuration page, if neces- sary change the IP address. The unit is not opera- Power failure during pro- Have the unit checked by Cus- tional after firmware gramming by the update file. tomer Service and replace if neces- upload. sary. Incorrect update file. Enter the IP address followed by / main.htm in your web browser and repeat the upload. No LUNs are dis- iSCSI server configuration Check iSCSI server configuration played after connect- has incorrect LUN mapping. and reconnect. ing to the iSCSI server. LUN FAIL is dis- The LUN list could not be Check iSCSI server configuration played under a node accessed because it was and reconnect. after connecting to assigned to the wrong net- the iSCSI server. work interface. LUN mapping not The iSCSI system does not Delete the identity on the iSCSI- possible. support the use of initiator parameter configuration page. identification. Bosch Security Systems Operating Instructions V 1.0 | 2006.12