Bosch NWD-455V03-20P Operating Instructions - Page 82

IP address, Subnet mask, Gateway address, Video transmission, NOTICE

Get Bosch NWD-455V03-20P PDF manuals and user guides View all Bosch NWD-455V03-20P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

82 en | Configuration via the browser FlexiDome IP restarted it can only be accessed at the new IP address. IP address Enter the desired IP address for the camera in this field. The IP address must be valid for the network. Subnet mask Enter the appropriate subnet mask for the set IP address here. Gateway address If you want the unit to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise, this field can remain empty (0.0.0.0). Video transmission If the unit is used behind a firewall, TCP (Port 80) should be selected as the transmission protocol. For use in a local network, choose UDP. NOTICE! i Multicast operation is only possible with the UDP protocol. The TCP protocol does not support multicast connections. The MTU value in UDP mode is 1514 bytes. HTTP browser port Select a different HTTP browser port from the list if required. The default HTTP port is 80. To limit connection to HTTPS you must deactivate the HTTP port. To do this activate the Off option. HTTPS browser port To limit browser access to encrypted connections, choose an HTTPS port from the list. The standard HTTPS port is 443. By activating the Off option, you can deactivate HTTPS ports and limit connections to unencrypted ports. The camera uses the TLS 1.0 protocol. Ensure that the browser has been configured to support this protocol. Also ensure that Java application support is activated (in the Java Plug-in Control Panel of the Windows Control Panel). V 1.0 | 2006.12 Operating Instructions Bosch Security Systems

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
82
en | Configuration via the browser
FlexiDome IP
V 1.0 | 2006.12
Operating Instructions
Bosch Security Systems
restarted it can only be accessed at the new IP
address.
IP address
Enter the desired IP address for the camera in this field. The IP
address must be valid for the network.
Subnet mask
Enter the appropriate subnet mask for the set IP address here.
Gateway address
If you want the unit to establish a connection to a remote loca-
tion in a different subnet, enter the IP address of the gateway
here. Otherwise, this field can remain empty (0.0.0.0).
Video transmission
If the unit is used behind a firewall, TCP (Port 80) should be
selected as the transmission protocol. For use in a local net-
work, choose UDP.
HTTP browser port
Select a different HTTP browser port from the list if required.
The default HTTP port is 80. To limit connection to HTTPS you
must deactivate the HTTP port. To do this activate the
Off
option.
HTTPS browser port
To limit browser access to encrypted connections, choose an
HTTPS port from the list. The standard HTTPS port is 443. By
activating the
Off
option, you can deactivate HTTPS ports and
limit connections to unencrypted ports.
The camera uses the TLS 1.0 protocol. Ensure that the browser
has been configured to support this protocol. Also ensure that
Java application support is activated (in the Java Plug-in Con-
trol Panel of the Windows Control Panel).
i
NOTICE!
Multicast operation is only possible with the UDP protocol. The
TCP protocol does not support multicast connections. The MTU
value in UDP mode is 1514 bytes.