Bosch NWD-455V03-20P Operating Instructions - Page 59
iSCSI LUN map, Target IP address, Target node, Target LUN, Target password
View all Bosch NWD-455V03-20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
FlexiDome IP Configuration via the browser | en 59 7.7.2 i iSCSI LUN map The LUN map displays the logical drives configured for the iSCSI storage device. The current user is displayed for each drive. 1. Double-click a free drive (LUN). The associated information is called up and automatically displayed in the fields below the map. 2. If the logical drive is password protected, you must first enter the password in the Target password field and click the Set button. NOTICE! When the information cannot be read due to the network topology you must enter the data manually so that the camera can access the drive. In this case you should ensure that the entries correspond exactly with the configuration of the iSCSI device. 7.7.3 7.7.4 7.7.5 7.7.6 i 3. After entering all the settings in the relevant fields, click Set. The camera attempts to create a connection to the required drive using this data. As soon as a connection has been established, the selected drive is used for recordings. Target IP address Enter the IP address of the required iSCSI server here. Target node Enter the number of the iSCSI server target node. Target LUN Enter the LUN of the required drive. Target password If the drive is password protected, enter the password. NOTICE! You may not enter a new password. This is only possible by configuring the iSCSI storage device. Bosch Security Systems Operating Instructions V 1.0 | 2006.12